Double Glazing Locks Repair
If a double-glazed window does not close, it causes drafts that allow valuable heat to escape. This also reduces the security of your home and puts you at greater risk of being a victim of burglary.
Double-glazed window seals, hinges, and handles can break down over time. If this is the case it can affect how your windows function and invalidate any warranty you may have.
Faulty Locks
While many take great care when installing anti-burglar devices for their gates and main doors, it is often overlooked that windows are the most popular targets for burglars. Having faulty locks could cause drafts to enter the home, which can allow valuable heat to escape and also weaken your home's security barriers.
If you find that your uPVC windows locks don't function, it is most likely that the lock mechanism is blocked. This is usually caused by the gearbox breaking in one component. This could cause the handle to turn 360 degrees but not open. This is a problem that is common to uPVC windows, but it can also happen in tilt-and turn windows and sliding sash window.
If this happens, it is possible to unlock the lock by applying pressure on the lever handle. This will unblock the gearbox and then restore the window's opening. If this does nothing then you might need to replace the entire window lock mechanism.
Most modern uPVC windows use espagnolette locks. double glazing window repairs are an internal locking system that secures the window by using locking cams that resemble mushrooms which are inserted into frame keeps. The handle controls the gearbox, which causes the cams to either move up or down. The most frequent issue is when the spindle on the lock has been damaged which causes the handle to move freely but not allowing the window to move open or shut.
A broken gearbox could cause your window to appear to be locked, but isn't actually. This is usually the case when the centre rods (sometimes known as crocodile teeth fixings) within the gearbox have broken off. If this is the situation, Misty Glaze can supply and install replacement rods to restore the operation of your window.
It is crucial not to force the lock to break or get stuck one. This can cause the lock to break or snap - especially with a uPVC window as it expands and expands as it warms and cools. It is recommended to contact a professional locksmith to diagnose the problem and repair it.
Sticky Doors/Window
The problem of windows and doors sticking is an extremely annoying problem, but they can also indicate more serious structural issues. It's important to get professional assistance if you're having difficulties opening or closing windows or doors. This could be the result of various factors, including foundation settlement and impaired crawl space support.
Humidity or frame problems can cause windows and doors to become stuck. When exposed to moisture, wood frames may begin to warp. This makes opening and closing them a challenge, even if the hardware is in good condition. The wood expands when this happens and is pushed up against the hinges creating friction.
If your door or window gets stuck in the summer, try rubbing it with bar soap to decrease the friction. This will make it smaller and may help temporarily solve the problem. This procedure will have to be repeated periodically during times of high humidity.
A more permanent fix involves making the door or window frame to create an even finish. This can be done either by hand or with an electric tool. A professional can also sand and paint or stain your frame or door to make it appear new and fresh.
If soaping or sanding don't solve the problem, it could be due to foundation settlement or a compromised crawlspace. Examine for cracks in your area. It's time for you to consult an expert in foundations if you see any of these indications. Foundation damage can lead to uneven floors and a misaligned interior wall and, in turn, sticking doors and windows. To avoid the need for expensive and dangerous repairs, it's crucial to deal with these problems as soon as they can be addressed. If ignored, these issues could escalate to the point where your entire home is structurally unstable. Contact the Southeast's top foundation repair specialists today to arrange an inspection and repair!
Cracking/Blowing Issues
Cracks can appear when double glazing starts to degrade. This can be a snazzy sight and also allow the heat inside your home to escape. It could also pose a safety risk for your family members, as the glass pieces that are sharp can cause injury when they break. It is better to repair any double-glazing windows with a crack before they become worse. This will increase the cost of replacement.
Window seals are crucial to stop drafts from entering your home and to keep air between your window panes. However, over time these may become damaged or shrink due to changes in weather conditions. Unchecked, it can result in condensation, moisture and draughts inside your home.
A professional is usually able to resolve this issue. They will be able to replace the window seal and get your windows back to their original state. They will also suggest other features that will decrease the likelihood of a stress crack occurring in the future, like trickle vents for better ventilation.
You could also try lubricating the hinges as well as handles on your windows and doors. This will enable them to move more smoothly and let the lock work as intended. Put some lubricating oil on a lint-free cloth and rub it into the hinges and handle mechanism as well as the areas where they pass through the frame (for instance, sash windows). You can also remove the handles and clean them with warm soapy water to remove any dirt or dust.
It is crucial to contact an expert if you find that your uPVC windows and doors aren't working as they should. They can find the issue quickly and fix it within a short amount of time. It's a lot less expensive and more secure than trying to do it yourself and possibly harming the mechanism. You'll also be able to rest in peace of mind knowing your home is secure and secure.